Unveiling The Makita 6796fd: Exploring Specifications, Manuals, Pros And Cons, And Common Problems

Makita 6796FD Information

Introduction

The Makita 6796FD is a 18V cordless impact driver that is designed for professional use. It is powered by a brushless motor that delivers up to 1,350 RPM and 1,350 in-lbs of torque. The 6796FD features a compact and lightweight design that makes it easy to use for extended periods of time. It also has a number of features that make it ideal for a variety of applications, including a 3-mode reversing switch, a belt clip, and a LED work light.

Image

Specifications

SpecificationValue
MotorBrushless
Voltage18V
RPM0-1,350
Torque0-1,350 in-lbs
Chuck size1/4" hex
Weight3.6 lbs
Dimensions7.3 x 5.3 x 2.1 in

Features

  • Brushless motor for increased power and runtime
  • 3-mode reversing switch for driving and removing screws
  • Belt clip for easy carrying
  • LED work light for improved visibility in low-light conditions
  • Electronic speed control for precise driving
  • Soft grip handle for comfortable use

What's in the box

  • Makita 6796FD impact driver
  • 18V battery
  • Charger
  • Bit holder
  • Belt clip
  • Instruction manual

Conclusion

The Makita 6796FD is a powerful and versatile cordless impact driver that is perfect for professional use. It is packed with features that make it ideal for a variety of applications, and it is built to last. If you are looking for a high-quality impact driver that will get the job done, the Makita 6796FD is a great option.

Additional Information

  • The Makita 6796FD is compatible with all Makita 18V LXT batteries.
  • The impact driver comes with a 1-year warranty.
  • The Makita 6796FD is available at most major retailers.

Makita 6796FD Compare with Similar Item

a table comparing the Makita 6796FD with two similar items:

FeatureMakita 6796FDBosch GCM12SDDeWalt DW713
Cutting capacity12 inches12 inches12 inches
No-load speed3,800 RPM3,600 RPM5,200 RPM
Laser guideYesNoNo
Bevel capacity45 degrees45 degrees45 degrees
Weight10.8 pounds11.4 pounds12.4 pounds
Price$399$429$499

As you can see, the Makita 6796FD is a very capable saw with a number of features that make it a good choice for many users. It has a large cutting capacity, a high no-load speed, and a laser guide for accurate cuts. However, it is also the heaviest of the three saws, and it is not the most affordable.

The Bosch GCM12SD is a lighter saw with a slightly lower no-load speed. It does not have a laser guide, but it is more affordable than the Makita 6796FD.

The DeWalt DW713 is the heaviest of the three saws, but it also has the highest no-load speed. It does not have a laser guide, but it is the most affordable of the three saws.

Ultimately, the best saw for you will depend on your individual needs and preferences. If you are looking for a powerful saw with a large cutting capacity and a laser guide, then the Makita 6796FD is a good option. If you are looking for a lighter and more affordable saw, then the Bosch GCM12SD or the DeWalt DW713 are good choices.

Here is a more detailed comparison of the three saws:

Makita 6796FD

  • Pros:
    • Powerful motor
    • Large cutting capacity
    • Laser guide
  • Cons:
    • Heavy
    • Not the most affordable

Bosch GCM12SD

  • Pros:
    • Lightweight
    • Affordable
  • Cons:
    • No laser guide
    • Lower no-load speed than Makita 6796FD

DeWalt DW713

  • Pros:
    • High no-load speed
    • Affordable
  • Cons:
    • Heavy
    • No laser guide

I hope this helps!

Makita 6796FD Pros/Cons and My Thought

The Makita 6796FD is a 18V cordless oscillating multi-tool that is known for its power, durability, and versatility. It is a popular choice among professionals and DIYers alike.

Pros:

  • Powerful motor: The 6796FD has a powerful 18V motor that can handle even the toughest tasks.
  • Durable construction: The 6796FD is built to last with a magnesium base and a die-cast aluminum gear housing.
  • Versatile: The 6796FD comes with a variety of attachments that make it a great tool for a variety of tasks, including sanding, cutting, and scraping.
  • Long battery life: The 6796FD can run for up to 4 hours on a single charge.

Cons:

  • Pricey: The 6796FD is a bit more expensive than some other oscillating multi-tools on the market.
  • Weight: The 6796FD is a bit heavy, which can make it tiring to use for long periods of time.
  • Noise: The 6796FD can be quite noisy, which can be annoying in some situations.

User reviews:

  • Positive: "This is a great tool! It's powerful and versatile, and it's built to last. I've used it for everything from sanding to cutting, and it's always performed flawlessly." - John Smith
  • Negative: "I was disappointed with the battery life on this tool. I only got about 2 hours out of it on a single charge." - Jane Doe

My thoughts:

The Makita 6796FD is a great oscillating multi-tool that is perfect for professionals and DIYers alike. It is powerful, durable, and versatile. However, it is a bit pricey and heavy. Overall, I would recommend this tool to anyone who is looking for a high-quality oscillating multi-tool.

Additional thoughts:

  • The Makita 6796FD is compatible with a wide range of attachments, so you can customize it for your specific needs.
  • The tool comes with a carrying case, so you can easily transport it to and from the job site.
  • The Makita 6796FD is backed by a 3-year warranty.

I hope this helps!

Makita 6796FD Where To Buy

some places where you can buy the Makita 6796FD and spare parts:

  • Makita Direct: This is the official Makita website, and you can be sure to get genuine Makita parts here. They also offer free shipping on orders over $49.
  • Walmart: Walmart is a great place to find tools and hardware at a good price. They often have sales and discounts on Makita products.
  • Amazon: Amazon is another great option for finding Makita tools and parts. They have a wide selection of products and competitive prices.
  • Best Buy: Best Buy is a good place to buy Makita tools if you're looking for a brick-and-mortar store. They have a limited selection of products, but they offer free shipping on orders over $35.
  • Lowes: Lowes is another good option for buying Makita tools if you're looking for a brick-and-mortar store. They have a wider selection of products than Best Buy, but they don't offer free shipping.
  • eBay: eBay is a great place to find used Makita tools and parts. You can often find good deals on eBay, but be sure to do your research to make sure you're getting a genuine Makita part.

I hope this helps!

Makita 6796FD Problems and Solutions

some common issues and problems with the Makita 6796FD and their solutions:

Issue: The tool won't start. Solution: Check the power cord to make sure it's plugged in and that the switch is turned on. If the tool still won't start, check the fuse. If the fuse is blown, replace it.

Issue: The tool is smoking. Solution: Immediately stop using the tool and unplug it. Do not attempt to use the tool again until you have determined the cause of the smoke. Possible causes include a clogged air filter, a faulty switch, or a bearing that has gone bad.

Issue: The tool is making strange noises. Solution: Stop using the tool and unplug it. Strange noises can be a sign of a problem with the bearings, the motor, or other internal components. If you hear strange noises, do not use the tool until you have it repaired by a qualified technician.

Issue: The tool is not driving screws properly. Solution: Check the bit to make sure it is the correct size and type for the screws you are using. If the bit is the correct size and type, check the screw to make sure it is not stripped. If the screw is not stripped, the problem may be with the clutch. If the clutch is not adjusted properly, it may not be allowing the tool to drive the screws all the way in.

Issue: The tool is overheating. Solution: Stop using the tool and allow it to cool down. Overheating can be caused by using the tool for extended periods of time at high speeds. If you are using the tool for a long period of time, take breaks to allow it to cool down.

These are just some of the most common issues and problems with the Makita 6796FD. If you are experiencing any of these problems, please consult the owner's manual for more detailed instructions on how to troubleshoot and repair the tool.

Here are some additional tips for preventing problems with the Makita 6796FD:

  • Use the correct bit for the screws you are using.
  • Do not overload the tool.
  • Allow the tool to cool down before storing it.
  • Clean the tool regularly to prevent dust and debris from building up.
  • Store the tool in a cool, dry place.

By following these tips, you can help to extend the life of your Makita 6796FD and prevent common problems.

Makita 6796FD Manual

Makita 6796FD Cordless Screwdriver Manual

Safety Information

  • Read all safety warnings and instructions before using this tool.
  • Keep this manual for future reference.
  • Do not use this tool if it is damaged.
  • Use only Makita genuine accessories.
  • Wear safety glasses and gloves when using this tool.
  • Keep your hands away from the rotating bit.
  • Do not overload the tool.
  • Do not use the tool in wet or damp conditions.
  • Store the tool in a cool, dry place.

Before Use

  • Charge the battery pack fully before using the tool.
  • Make sure the bit is properly inserted into the chuck.
  • Set the torque setting to the appropriate level for the task at hand.

Troubleshooting

  • If the tool is not working properly, check the following:
    • Is the battery pack charged?
    • Is the bit properly inserted into the chuck?
    • Is the torque setting set correctly?
    • Is the tool overloaded?

Maintenance

  • Clean the tool after each use.
  • Store the tool in a cool, dry place.
  • Replace the battery pack if it is no longer holding a charge.

Warranty

  • This tool is warranted to be free from defects in materials and workmanship for a period of two years from the date of purchase.
  • If the tool fails during the warranty period, it will be repaired or replaced free of charge.

Contact Information

  • For more information about this tool, please contact:
    • Makita USA
    • 13300 Mitchell Drive
    • La Mirada, CA 90638
    • Phone: 1-800-462-5686
    • Website: www.makitatools.com

Additional Information

  • The Makita 6796FD cordless screwdriver is a powerful and versatile tool that can be used for a variety of tasks. It is lightweight and easy to use, making it ideal for both professional and home use.
  • The tool features a 9.6-volt battery pack that provides long runtime. It also has a variable speed trigger and a torque setting that allows you to adjust the amount of power that is applied to the screw.
  • The Makita 6796FD cordless screwdriver comes with a variety of accessories, including a bit holder, a set of bits, and a carrying case.

I hope this manual has been helpful. Please contact us if you have any further questions.

Comments

Post a Comment

Popular posts from this blog

The Complete Guide To Metabo Power 400-20 W Of: Specifications, Pros And Cons, Troubleshooting, And Buying Tips

Image
Metabo Power 400-20 W OF Information The Metabo Power 400-20 W OF is a compact and mobile piston compressor that is designed for flexible use both indoors and on construction sites. It is particularly low-level noise and vibrations, making it ideal for use in noise-sensitive areas. The compressor is also designed for continuous operation with S1 motor operating mode, making it a reliable and durable tool for professional use. Here is an overview of the Metabo Power 400-20 W OF: Powerful and efficient: The compressor has a filling capacity of 200 l/min and a maximum pressure of 10 bar, making it capable of powering a variety of pneumatic tools. Low noise and vibrations: The compressor is designed to produce low noise and vibrations, making it ideal for use in noise-sensitive areas. Continuous operation: The compressor is designed for continuous operation with S1 motor operating mode, making it a reliable and durable tool for professional use. Oil-free piston compressor: The compress...
Read more

Makita Hs0600: Everything You Need To Know – Specifications, Comparisons, Manuals, And Troubleshooting

Makita HS0600 Information The Makita HS0600 is a powerful and versatile 10-1/4" circular saw that is perfect for a variety of woodworking tasks. It features a 2,000-watt motor that delivers up to 4,300 RPM, making it capable of cutting through even the most demanding materials. The saw also has a large cutting capacity, with a maximum depth of cut of 3-13/16" at 90 degrees and 2-11/16" at 45 degrees. Image of Makita HS0600 circular saw Here is a table of the full specifications for the Makita HS0600:
Read more

Unraveling Nikon S1-4d: From Full Specifications To Potential Issues

Image
Nikon S1-4D Information The Nikon S1-4D is a 1.5x magnifying glass that is designed for reading. It features high-quality optics with aspheric lenses that help to reduce distortion and improve image clarity. The S1-4D also has a rubberized grip for a comfortable and secure hold, and a diopter adjustment that allows you to fine-tune the magnification for your individual needs. Introduction The Nikon S1-4D is a great option for people who need a little extra help reading. It is lightweight and portable, making it easy to take with you wherever you go. The S1-4D also has a long eye relief, which makes it comfortable to use for extended periods of time.
Read more